Return to FAN's Pesticide Homepage

Return to PFOA Class Action Suit

Return to Newspaper articles and Documents related to this Class Action

C8 or C-8: PFOA is perfluorooctanoic acid and is sometimes called C8. It is a man-made chemical and does not occur naturally in the environment. The "PFOA" acronym is used to indicate not only perfluorooctanoic acid itself, but also its principal salts.
The PFOA derivative of greatest concern and most wide spread use is the ammonium salt (
Ammonium perfluorooctanoate) commonly known as C8, C-8, or APFO and the chemical of concern in the Class Action suit in Ohio.

Ammonium perfluorooctanoate (APFO or C8)
CAS No. 3825-26-1. Molecular formula:

Perfluorooctanoic acid (PFOA or C8)
CAS No: 335-67-1
. Molecular formula:

The DuPont site where APFO is used as a reaction aid is the Washington Works (Route 892, Washington, West Virginia 26181) located along the Ohio River approximately seven miles southwest of Parkersburg, West Virginia.

The Little Hocking Water Association well field is located in Ohio on the north side of the Ohio River immediately across from the Washington Works facility. Consumers of this drinking water have brought a Class Action suit against the Association and DuPont for the contamination of their drinking water with DuPont's APFO, which residents and media refer to as C8.

PFOA is used as a processing aid in the manufacture of fluoropolymers to produce hundreds of items such as non-stick surfaces on cookware (TEFLON), protective finishes on carpets (SCOTCHGUARD, STAINMASTER), clothing (GORE-TEX), and the weather-resistant barrier sheeting used on homes under the exterior siding (TYVEK).


Online at: http://www.mariettatimes.com/news/story/0927202003_new16chemfamily.asp

September 27, 2003

The Marietta Times

Examining the water we drink:

C8 spawns chemical family

By Callie Lyons

The Teflon-related chemical that has become familiar to local people by the trade name C8 is named for the eight carbon atoms in its chain. If the scientific designation of ammonium perfluorooctanoate sounds complicated, the thousands of consumer products and technological advances made possible by the substance are nothing short of miraculous.

"PFOA, or C8, is not a Teflon ingredient," said Paul Bossert, plant manager for DuPont Washington, W.Va., Works. "It is a processing aid used in the manufacture of polyfluoromers, including those sold under the Teflon brand."

The best explanation of DuPont's C8 begins with a look at PFOA, a chemical under investigation by the U.S. Environmental Protection Agency for its possible toxicity and unexplainable prevalence.

Perfluorooctanoic acid is described by the EPA as a synthetic chemical used in the manufacture of fluoropolymers such as Teflon. Fluoropolymers have certain extraordinary properties, resisting fire, oil, stains, grease and water. From non-stick coatings to protective finishes, consumer applications are numerous.

"The issue of interest to the people of Lubeck and Little Hocking is ammonium perfluorooctoanoate in the drinking water," said Walt Stewart of Marietta, a retired DuPont worker. "Because this is a mouthful to say it is commonly called C8, since it is a compound that has eight carbon atoms in a chain. Unfortunately, this is a poor abbreviation for the chemical since there are many organic chemicals with eight carbon atoms in a chain."

Scientists use the acronym PFOA to describe the group of chemicals, of which the principal ammonium salt, designated with the trade name C8, is the most common. C8 is a surfactant, or detergent-like reaction aid that helps to keep the resin being manufactured in suspension instead of forming huge particles.

"During the reaction, the surfactant keeps the fluoropolymer particles all negatively charged so that they repel each other," Bossert said. "The polymer chains can continue to grow independently instead of clumping."

Fluorinated polymers themselves are not expected to contain PFOA, or be a pathway for humans, but the EPA is taking steps to better understand this association. Most fluoropolymer products are used in heat-treated applications that remove the PFOA before the final product leaves the manufacturing plant.

Fluorinated telomers, which are called "short polymers" because of a shorter chemical strand, are not made with PFOA, but are expected to biodegrade into PFOA. Telomers also exhibit stain- and grease- resistant properties. With the potential for thousands of consumer product uses, among other things, telomers are commonly used in chemical coatings in fast food packaging.

"The properties of fluoropolymers - chemically inert, heat resistant, good electrical properties - help enable many technologies that are of value to society," said Rob Banerjee, superintendent of DuPont Washington Works Fluoropolymers Manufacturing. "Fluoropolymers help reduce pollution from heavy industries such as chemical processing or power generation, protecting people and the environment. Fluoropolymers enable the manufacture of small, high-speed computer chips that are core to the information technology benefits people expect at work and at home. Telecommunications cable insulated with fluoropolymers helps reduce risk of fire and harm to people and buildings."

The most familiar use of Teflon chemistry is coated cookware, but DuPont officials say only four percent of its production is associated with non-stick pots and pans.

The DuPont Washington Works plant uses about 100,000 pounds of C8 a year, most of which is recycled, Banerjee said. It's a very expensive material, so the corporation tries to recover as much as possible for reuse. DuPont is the only domestic manufacturer of C8 since the 3M Co. phased out its production.

Ohioan discovered Teflon out of a failed experiment

Teflon wasn't invented in Ohio, but the man who discovered it was born here.

Dr. Roy J. Plunkett discovered Teflon by accident in 1938 as a result of a failed experiment involving refrigerator coolant. The waxy substance proved to be the most slippery material in existence.

Plunkett was born in New Carlisle, Ohio, in 1910, the son of a poor farmer. He attended Manchester College and received a masters and doctorate from The Ohio State University.

He began working for DuPont Jackson Laboratory in Deepwater, N.J., as a research chemist in 1936.
Plunkett's discovery was found to be both heat-resistant and stick-resistant. After 10 years of research, DuPont introduced Teflon in 1949. Before his death in 1994, Plunkett lived to see his invention applied to everything from satellites to cookware.

The National Inventors Hall of Fame said after his discovery of Teflon, Plunkett managed research, development and production efforts that resulted in the creation of numerous new fluorochemical products and processes that have become widely used in the refrigeration, aerosol, electronic, plastics and aerospace industries. Many are considered to be of critical importance to national defense.